Anycubic Kobra 3 Max: print settings
7 sourced settings for this printer.
official
PLA
Anycubic Kobra 3 Max · Anycubic
Nozzle 190-220 °C (rec…Bed 50-60 °C0.4 mm
Anycubic filament guide PLA range. Level bed; glue stick optional.
See full settings →official
PETG
Anycubic Kobra 3 Max · Anycubic
Nozzle 230-250 °CBed 70-80 °C0.4 mm
Dry PETG. Slightly lower cooling than PLA.
See full settings →official
ABS
Anycubic Kobra 3 Max · Anycubic
Nozzle 240-260 °CBed 90-100 °C0.4 mm
Enclosure strongly recommended. Dry filament.
See full settings →official
TPU
Anycubic Kobra 3 Max · Anycubic
Nozzle 210-230 °CBed 40-60 °CSpeed Slow0.4 mm
Print slowly. Direct drive preferred. Disable or minimize retraction.
See full settings →official
ASA
Anycubic Kobra 3 Max · Anycubic
Nozzle 240-260 °CBed 90-100 °C0.4 mm
Similar to ABS; UV stable. Enclosure recommended.
See full settings →official
PLA Glow
Anycubic Kobra 3 Max · Anycubic
Nozzle 190-220 °CBed 50-60 °C0.4 mm
Glow filament is brittle; ACE Pro feeding may clog — external spool recommended.
See full settings →official
PLA+
Anycubic Kobra 3 Max · Anycubic
Nozzle 200-220 °CBed 50-60 °C0.4 mm
PLA+ often prints a bit hotter than basic PLA per Anycubic guide.
See full settings →