PETG on Anycubic Kobra 3 Max

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Anycubic Kobra 3 Max

Filament brand

Anycubic

Filament type

PETG

Slicer

Anycubic Slicer Next / Orca

Nozzle size

0.4 mm

Nozzle temp

230-250 °C

Bed temp

70-80 °C

Notes

Dry PETG. Slightly lower cooling than PLA.

Source: Anycubic Wiki · 2025-07-25

Summarized from the linked source. Always test on scrap before production runs.